Technician Imaging Kiosk Kit

Hardware Kit

Description

Qty

Large Washer

1

M8 Cap screw

1

4 mm hex key

1

6 mm hex key

1

10-32 screws

4

0.125" hex key

1

M8 flat head screw

1

5mm hex key

1

Power Kit

Description

Qty

USB-C to C Cable

1

45W USB-C Power Supply

1

Assembly

Step 1: Insert the M8 flat head screw from the bottom of the base and screw it into the mount ensuring the notches on the mount align with the screws on the base as shown below.

Step 2: Attach the Head Unit to the mount using the 10-32 screws and hex key provided.

Step 3: Run the USB-C to C cable from the ‘Power-in‘ on the head unit through the mount as shown below. Use included power supply unit and plug into a wall outlet.

Step 4: Install iPad by removing the faceplate. Insert included key into keyhole on the back of the head unit, and turn to the right to release faceplate. With faceplate removed, turn key back to neutral position and remove. Store in a safe place.

Step 5: Run the white power cable included with iPad from 'iPad' plug-in on the head unit to left side of head unit. Plug in the iPad and place in head unit.

Step 6: Replace faceplate by placing right side against head unit first, and then place left side down against head unit with medium pressure until the faceplate latches into place.

Done! Plug in the power cable. Tap the iPad screen and swipe up to get to the home screen. Open the TelePharm app and login. If needed, visit the TelePharm Help Desk at help.telepharm.io to learn about account creation and using TelePharm.

Did this answer your question?